UNIVERSAL USE
Sand any fretboard radius between 7.25” and 20”. 
 
LOW COST ABRASIVE
Utilses PSA abrasive discs.
 
FRETBOARD RADIUS SANDING PLATES
The sanding tool plates are 75mm wide x 150mm long with rounded ends to match the abrasive discs. (The overlaps at the sides of the tool are folded back and can be utilised by rotating the abrasive around).
 
Replacement Abrasive  is available in a choice of quantity and grit.
 
The handle is made from hardwood and includes fixing screws for attaching the sanding plates. The short length of the tool provides a good sanding rate with 2-handed use.
 
FULL FRETBOARD RADIUS SANDING KIT - UNIVERSAL USE
The Full Radius Sanding Kit is supplied with hardwood block handle, 120 grit & 80 grit abrasives and all 5 interchangeable tool plates for 7.25", 9.5", 12", 15" & 20" radii.
 
The spacing of the tool plates allows the kit to sand any fretboard radius between 7.25” and 20”. 
 
To sand a fretboard radius that doesn't correspond to a particular tool plate, the next size tool should be selected. The desired radius is achieved by applying extra pressure at the sides of the fretboard and comparing with a radius gauge.
 
FULL KIT CONTENTS:
Set of 5 Fretboard Radius Sanding Plates: 7.25", 9.5", 12", 15", & 20".
Hardwood Handle.
5 x Ø150mm PSA Sanding Discs 80 Grit.
5 x Ø150mm PSA Sanding Discs 120 Grit.